| Disassembly & Fastening Tools | Adjustable wrenches (10/12-inch), open-end wrench set, socket wrench set | Disassemble/tighten flange bolts, joints and bracket fixing screws for fasteners of different specifications |
| Hex key set (3-10mm) | Tighten hex screws for equipment body, lamp tube fixation and bracket fine adjustment |
| Magnetic screwdrivers (Phillips/slotted) | Disassemble and assemble screws for wiring, control cabinet fixation and accessory installation |
| Torque wrench (optional) | Precisely tighten flange and equipment fixing bolts to prevent seal/equipment damage from over-tightening |
| Cutting & Connection Tools | Pipe cutter/angle grinder (with cutting discs) | Adjust pipeline length on-site and cut steel/UPVC pipes |
| Beveling machine (optional) | Bevel metal pipes to ensure sealing of flange butt joints |
| Teflon tape winder, wrench | Seal and wind threaded joints, assist in tightening |
| Measurement & Marking Tools | Level (laser/bubble type) | Calibrate horizontal installation of equipment to prevent uneven water flow |
| Tape measure (5/10m), marker pen | Measure pipeline length, bracket spacing and equipment installation position, and mark on-site |
| Plumb bob | Calibrate verticality when installing brackets on walls/columns |
| Electrical Construction Tools | Wire stripper (0.5-6mm²), crimping tool | Strip wire insulation and crimp cable lugs during electrical wiring |
| Test pencil, multimeter | Detect on-site power supply voltage and on-off status, troubleshoot circuit faults and avoid wrong wiring |
| Insulating tape/heat shrink tube gun | Insulate and wrap wiring after electrical connection for water and leakage proof |
| Auxiliary Construction Tools | Rubber mallet | Adjust pipeline/equipment position to avoid damage to equipment/sleeves from hard knocking |
| Rags, degreaser | Wipe pipeline interfaces and quartz sleeve surfaces to remove oil stains/impurities for better sealing/light transmittance |
| Flashlight/work light | Construction lighting in low-light areas such as pump rooms and equipment rooms |